Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Place of origin | China |
Form Factor | QSFP28+ |
Wavelength | 1271nm, 1291nm, 1311nm and 1331nm |
Distance | 2KM |
Data Rate (max) | 100Gb |
Low End Case Temperature (°C) | 0℃ |
High End Case Temperature (°C) | 70℃ |
Power Supply | 3.3v |
Connector | LC duplex connector |
Warranty | 3-year |
Fiber Type | Single mode |
TX | DML CWDM |
DDMI | Yes |
$238.00 $638.00
Only logged in customers who have purchased this product may leave a review.
Hot-pluggable QSFP-DD form factor
Compliant with QSFP-DD MSA standard
Compliant with IEEE 802.3bs 400GBASE-FR8 standard
8 channels full-duplex transceiver module
Supports 400Gb/s aggregate bit rate
8 channels LWDM EML transmitter
8 channels PIN ROSA
Internal CDR circuits on both receiver and transmitter channels
Supports CDR bypass
12W maximum power dissipation
Maximum link length of 2km on SMF
Duplex LC receptacles
Operating case temperature range: 0 to 70°C
Single 3.3V power supply
RoHS-6 compliant (lead free)
QSFP-DD optical module, QSFP-DD optical fiber module, QSFP-DD 200G optical module, QSFP-DD 200G optical fiber module, QSFP-DD 400G optical module, QSFP-DD 400G optical fiber module; currently QSFP28 optical module has four electrical channels. Each channel operates at 10Gbps or 25Gbps and supports 40G and 100G Ethernet applications. The newly formed QSFP-DD team plans to increase the number of channels to eight, with up to 25 Gbps per channel through NRZ modulation or up to 50 Gbps per channel through PAM4 modulation, supporting 200 Gbps or 400 Gbps optical transmission
Form Factor: CFP2
Finisar’s FTLC3322x3NL CFP2 Analog Coherent Optics (ACO) transceiver module is designed to support high density line card applications with the coherent Digital Signal Processor (DSP) on the host board. The Class 2 FTLC3322U3NL module with a linear RF interface can support spectral shaping as well as multiple modulation formats to achieve optimized balancing of transmission reach and data rate requirements. The module can be tuned across the full C-band, with optional Flexgrid® support. The FTLC3322U3NL transceiver conforms to the OIF-CFP2-ACO-01.0 implementation agreement. The optical transceiver is RoHS compliant as described in Finisar Application Note AN-2038.
Features
Hot pluggable industry standard CFP2 form factor
Conforms with OIF-CFP2-ACO-01.0 implementation agreement, Class 1 or 2
Class 2 module supports spectral shaping and multiple modulation formats:
100G DP-QPSK
150G DP-8QAM
200G DP-16QAM
Full C-band tunable Tx and Rx, with optional Flexgrid® support
Power dissipation <13.0W
RoHS compliant
MDIO management interface
Commercial case temperature range: 0°C to 70°C
Applications
Regional 100G DWDM coherent transmission (DP-QPSK)
Metro 200G DP-16QAM coherent transmission (DP-16QAM modulation)
Data Center interconnect
Features
· QSFP-DD MSA compliant
· 4 CWDM lanes MUX/DEMUX design
· 100G Lambda MSA 400G-LR4 Specification compliant
· Up to 10km transmission on single mode fiber (SMF) with FEC
· Operating case temperature: 0 to 70oC
· 8×53.125Gb/s electrical interface (400GAUI-8)
· Data Rate 106.25Gbps (PAM4) per channel.
· Maximum power consumption 12W
· Duplex LC connector
· RoHS compliant
TOP-400G-QSFP-DD LR4 400Gb/s QSFP-DD LR4 10km SMF Optical Transceiver
There are no reviews yet.